Electromagnetic Flow Meters

FM9380-F75

Electromagnetic Flow Meters

The innovative clean-sheet design contains no moving parts which means no service or maintenance requirements and has no risk of clogging.

Where to Buy

No flow obstructions = no clogging risk
No moving parts means no service or maintenance requirements
Fast response times improves performance of regulating systems
Works with any conducting fluid
Clean-sheet design optimized for agricultural application equipment
Optimized design balances excellent low flow performance with low pressure loss at high flow rates
Unaffected by changes in fluid temperature, density, viscosity, concentration and electrical conductivity

Specifications	FM9380-F75
Rated Flow Range	0.6 to 100 GPM / 2.3 to 380 LPM
Accuracy	+/- 2% of reading between >1.0 GPM to 100 GPM / 3.8 LPM to 380 LPM +/- 5% of reading between 0.6 GPM to 1.0 GPM / 2.3 LPM to 3.8 LPM
Pressure Drop	4 PSI @ 100 GPM / 0.276 bar @ 380 LPM
Pressure Rating	200 PSI / 14 bar
Calibration Number	1,500 pulses per gallon / 396 pulses per liter
Fluid Requirements	Water based with conductivity >50 μs/cm
Inlets / Outlets	TeeJet F75 Series Flange
Materials	Polypropylene, 300 series stainless steel, Viton seals
Temperature Rating	Operating: 32°F to +140°F / 0°C to +60°C Storage: -40°F to 185°F / -40°C to +85°C
Voltage	4.5 to 16 VDC
Current	<1 amp
Output	50% Square Wave, NPN with a 10K pull-up resistor
LEDs	Green — Power Flashing Orange — Flow 1 Hz @ 0.6 to 3 GPM / >2.3 to 11.4 LPM 3 Hz @ >3 to 15 GPM / >14.4 to 56.8 LPM 10 Hz @ >15 to 100 GPM / >56.8 to 380 LPM
Size	6.3″ x 4.1″ x 3.1″ / 160 mm x 105 mm x 78 mm
Maximum Free Passage	0.58″ / 14.7 mm
Equivalent Flow Diameter	0.85″ / 21.6 mm
Weight	1.2 lbs / 0.5 kg
Ingress Protection	IP67